The TPS54560BDDAR is a60-V, 5-A step-down regulator with anintegrated high side MOSFET. Current-mode control provides simple external compensation andflexible component selection. A low-ripple pulse-skip mode reduces no-load-supply current to 146μA. Shutdown supply current is reduced to 2 μA when the EN (enable) pin is pulled low.
Undervoltage lockout is internally set at 4.3 V but can be increased using the EN pin.Output voltage start-up ramp is internally controlled to provide a controlled start-up andeliminate overshoot.
A wide switching frequency range allows either efficiency or external component size tobe optimized. Output current is limited cycle-by-cycle. Frequency foldback and thermal shutdownprotects internal and external components during an overload condition.
The TPS54560BDDAR isavailable in an 8-pin thermally enhanced HSOIC PowerPAD package.
High efficiency at light loads with pulse skipping Eco-mode
92-mΩ high-side MOSFET
146-μA operating quiescent current and
2-μA shutdown current
100-kHz to 2.5-MHz Fixed switching frequency
Synchronizes to external clock
Low dropout at light loads with integrated BOOT recharge FET
Adjustable UVLO and hysteresis
0.8 V 1% Internal voltage reference
8-Pin HSOIC with PowerPAD package
–40°C to 150°C TJ operating range
Create a custom design using the TPS54560B with the WEBENCH Power Designer
(Picture: Diagram)
Manufacturer
TI
Packing
Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube
RoHs Status
Lead free / RoHS Compliant
Package/Case
HSOIC (DDA) | 8