075582814553
LM4041 Shunt Voltage Reference Working Principle

FREE-SKY (HK) ELECTRONICS CO.,LIMITED / 11-17 18:25

The LM4041 improved precision micropower shunt voltage reference is designed to provide a stable 1.225V output while maintaining low power consumption, compact size, and high reliability. This article will discuss the LM4041 basic overview, pinout details, model variants, functional block diagram, specifications, features, operating circuits, test circuits, applications, and comparison with other voltage references.


Catalog

1. LM4041 Voltage Reference Basic
2. LM4041 Voltage Reference CAD Models
3. LM4041 Voltage Reference Pinout Details
4. LM4041 Part Model Variant
5. LM4041 Functional Block Diagram
6. LM4041 Voltage Reference Specifications
7. LM4041 Voltage Reference Features
8. LM4041 Typical Operating Circuit
9. LM4041 Test Circuit
10. LM4041 Voltage Reference Applications
11. Comparison: LM4041 vs Other Voltage Reference
12. LM4041 Mechanical Dimensions
13. Conclusion
LM4041 Voltage Reference

LM4041 Voltage Reference Basic

The LM4041 improved precision micropower shunt voltage reference is a compact two-terminal bandgap reference designed to deliver a stable and accurate output voltage, typically 1.225V. It operates in shunt mode, similar to a Zener diode, maintaining a constant reference voltage over a wide range of supply conditions. This makes it suitable for precision analog and mixed-signal circuits.

The device features laser-trimmed resistors for high initial accuracy, with tolerance options as tight as 0.1%. It offers a low temperature coefficient (around 100 ppm/°C) to ensure stable performance across –40°C to +125°C. With a low operating current range of approximately 60µA to 12mA and low dynamic impedance, it provides reliable regulation without requiring an external stabilization capacitor.

If you are interested in purchasing the LM4041, feel free to contact us for pricing and availability.

LM4041 Voltage Reference CAD Models

LM4041 Voltage Reference CAD Models

LM4041 Voltage Reference Pinout Details

LM4041 Voltage Reference Pinout Details
Pin Number
Pin Name
Symbol
Description
1
Cathode
+
Positive terminal of the shunt reference.
 Connect to supply voltage through a current-limiting resistor.
Output reference voltage appears across this pin and Anode.
2
Anode
–
Negative terminal.
Connect to ground in most applications.
3
N.C. (No Connect)
—
Not internally connected.
Leave unconnected or follow manufacturer recommendations.

LM4041 Part Model Variant

Part Number
Temp Range
Pin-Package
Top Mark
LM4041AIX3-1.2+T
-40°C to +85°C
3 SC70-3
ABF
LM4041AIM3-1.2+T
-40°C to +85°C
3 SOT23-3
FZEB
LM4041AEX3-1.2-T
-40°C to +125°C
3 SC70-3
ALB
LM4041AEM3-1.2+T
-40°C to +125°C
3 SOT23-3
FZNC
LM4041BIX3-1.2+T
-40°C to +85°C
3 SC70-3
ABG
LM4041BIM3-1.2+T
-40°C to +85°C
3 SOT23-3
FZEC
LM4041BEX3-1.2+T
-40°C to +125°C
3 SC70-3
ALC
LM4041BEM3-1.2+T
-40°C to +125°C
3 SOT23-3
FZND
LM4041CIX3-1.2+T
-40°C to +85°C
3 SC70-3
ABH
LM4041CIM3-1.2+T
-40°C to +85°C
3 SOT23-3
FZED
LM4041CEX3-1.2+T
-40°C to +125°C
3 SC70-3
ALD
LM4041CEM3-1.2-T
-40°C to +125°C
3 SOT23-3
FZNE
LM4041DIX3-1.2+T
-40°C to +85°C
3 SC70-3
ABI
LM4041DIM3-1.2+T
-40°C to +85°C
3 SOT23-3
FZEE
LM4041DEX3-1.2+T
-40°C to +125°C
3 SC70-3
ALE
LM4041DEM3-1.2-T
-40°C to +125°C
3 SOT23-3
FZNF

LM4041 Functional Block Diagram

The functional block diagram of the LM4041 shows how the device generates and regulates a precise reference voltage internally. At the left side, a resistor network and transistor structure form the bandgap reference core. This circuit produces a stable temperature-compensated reference voltage (VREF) by combining voltage components with opposite temperature coefficients, which keeps the output stable over temperature changes.

LM4041 Functional Block Diagram

In the center, current sources bias the internal transistors to maintain consistent operating conditions. An internal error amplifier compares the generated reference voltage with the feedback (FB) signal. If the output voltage changes, the amplifier adjusts the drive to the output transistor.

On the right side, the output transistor controls the shunt current between the cathode and anode. By increasing or decreasing the shunt current, the LM4041 keeps the cathode voltage constant. This closed-loop regulation ensures accurate and stable 1.225V reference output across varying supply and load conditions.

LM4041 Voltage Reference Specifications

Absolute Maximum Ratings

Parameter
Rating
Reverse Current (Cathode to Anode)
20 mA
Forward Current (Anode to Cathode)
10 mA
Continuous Power Dissipation – SC70 (TA = +70°C)
174 mW
SC70 Derating Above +70°C
2.17 mW/°C
Continuous Power Dissipation – SOT23 (TA = +70°C)
320 mW
SOT23 Derating Above +70°C
4.01 mW/°C
Operating Temperature Range (LM4041_I_ _ )
-40°C to +85°C
Operating Temperature Range (LM4041_E_ _ )
-40°C to +125°C
Storage Temperature Range
-65°C to +150°C
Junction Temperature
+150°C
Lead Temperature (Soldering, 10s)
+300°C


Electrical Characteristics

Electrical Characteristics

LM4041 Voltage Reference Features

• Ultra-Small 3-Pin SC70 / SOT23 Package - The LM4041 comes in compact surface-mount packages, making it ideal for space-constrained PCB layouts. Its small footprint is suitable for portable, handheld, and high-density electronic designs.

• High Initial Accuracy (Up to ±0.1%) - Laser-trimmed resistors ensure very tight tolerance options. This high precision reduces calibration requirements and improves overall system accuracy in measurement circuits.

• Low Temperature Coefficient (100ppm/°C max) - The device maintains stable voltage output across temperature changes, ensuring reliable performance from -40°C to +125°C depending on the grade.

• Wide Operating Current Range (60µA to 12mA) - It supports low-current micropower applications while also handling higher bias currents for improved dynamic performance.

• Low Output Noise (20µVRMS, 10Hz to 10kHz) - The low noise characteristic makes it suitable for precision analog circuits, ADC/DAC references, and sensor interfaces.

• 1.225V Fixed Reverse Breakdown Voltage - The bandgap-based reference provides a stable and accurate 1.225V output voltage for precision applications.

• No External Output Capacitor Required - The LM4041 remains stable without needing additional output capacitors, simplifying circuit design.

• Capacitive Load Tolerance - It can drive capacitive loads without oscillation, increasing design flexibility.

• Low Dynamic Impedance - Maintains stable output voltage even when the load current changes, improving regulation accuracy.

• Micropower Operation - Designed for low power consumption, making it suitable for battery-powered and energy-sensitive applications.

• Wide Industrial Temperature Range - Available in both commercial (-40°C to +85°C) and extended (-40°C to +125°C) versions for industrial environments.

LM4041 Typical Operating Circuit

The typical operating circuit of the LM4041 used as a shunt voltage reference. The device works similarly to a precision Zener diode. A supply voltage (VS) is connected through a series resistor (RS) to the reference node (VR). The LM4041 is connected between this node and ground, where it maintains a fixed reference voltage (typically 1.225V) across its terminals.

LM4041 Typical Operating Circuit

The series resistor RS is very important. It limits the total current flowing from the supply and sets the operating current of the device. The current through RS splits into two parts: ISHUNT (current flowing through the LM4041) and ILOAD (current drawn by the load). For proper regulation, the LM4041 must always receive at least its minimum shunt current (about 60µA).

To use the LM4041, choose RS so that the device remains within its operating current range (60µA to 12mA) under all load conditions. The output reference voltage is taken at VR relative to ground.

LM4041 Test Circuit

LM4041 Test Circuit

Load-Transient Test Circuit

This circuit checks how well the LM4041 maintains a stable reference voltage when the load current suddenly changes. A supply voltage (VB) feeds the reference through a 1kΩ resistor, which sets the shunt current (ISHUNT). A load resistor (RL) is connected to a pulse generator (VGEN) to create fast changes in load current.

When the load current increases or decreases quickly, the LM4041 must respond immediately to keep the output voltage (VR) stable. This test measures voltage deviation and recovery time, showing how stable the reference is under dynamic conditions.

Startup Characteristics Test Circuit

This circuit evaluates how the LM4041 behaves during power-up. A pulsed input source (VIN, 1Hz rate) applies voltage through a 30kΩ resistor. The output voltage (VR) is monitored to observe startup delay, settling time, and stability. This test ensures the LM4041 reaches its correct 1.225V reference quickly and smoothly when power is applied.

LM4041 Voltage Reference Applications

• ADC Reference Voltage - The LM4041 provides a stable 1.225V reference for Analog-to-Digital Converters (ADCs). A precise reference improves measurement accuracy and reduces conversion errors in data acquisition systems.

• DAC Reference Circuits - In Digital-to-Analog Converter (DAC) applications, the LM4041 ensures consistent output scaling. Its low temperature drift helps maintain stable analog output levels.

• Battery-Powered Devices - With its micropower operation (as low as 60µA), the LM4041 is ideal for portable electronics such as handheld meters and IoT devices where low power consumption is critical.

• Sensor Signal Conditioning - Precision sensors require stable reference voltages for accurate readings. The LM4041 supports temperature sensors, pressure sensors, and bridge circuits.

• Power Supply Monitoring - It can be used in voltage supervision and regulation circuits to monitor supply levels and maintain stable system performance.

• Industrial Control Systems - The wide operating temperature range (-40°C to +125°C) makes it suitable for industrial automation and control environments.

• Current Source Circuits - The LM4041 can be used to create accurate current sources when combined with external resistors.

• Calibration Reference Modules - Its high initial accuracy makes it suitable for calibration equipment and precision test instruments.

Comparison: LM4041 vs Other Voltage Reference

Feature
LM4041
TL431
LM385-1.2
LM4050
Type
Shunt Reference
Adjustable Shunt Reference
Micropower Shunt
Series Reference
Output Voltage
Fixed (1.225V typical)
Adjustable (2.5V to 36V)
Fixed (1.235V)
Fixed (2.5V / 3V / 5V)
Initial Accuracy
±0.1% to ±1%
±0.5% to ±2%
±1% to ±2%
±0.1% to ±0.5%
Tempco
100ppm/°C (typ)
~50–100ppm/°C
~20–100ppm/°C
~50ppm/°C
Operating Current
60µA to 12mA
1mA to 100mA
20µA to 20mA
60µA to 10mA
Output Capacitor Required
No
Sometimes
No
No
Package Size
SC70 / SOT23
TO-92 / SOT23
TO-92 / SOT23
SOT23
Best For
Low-voltage precision ADC reference
Adjustable regulator circuits
Ultra-low power applications
Higher voltage precision reference

LM4041 Mechanical Dimensions

LM4041 Mechanical Dimensions

Conclusion

The LM4041 is a compact, high-precision, and low-power shunt voltage reference designed for stable 1.225V output in demanding electronic applications. Its laser-trimmed accuracy, low noise, low temperature drift, and wide operating range make it suitable for precision measurement systems, battery-powered equipment, industrial control circuits, and calibration modules. By understanding its internal operation, electrical specifications, resistor selection method, and performance testing circuits, you can confidently integrate the LM4041 into reliable and efficient systems.


Processed in 1.153989 Second , 23 querys.