The LM7912 is a fixed –12V negative linear voltage regulator designed for applications that require a stable and reliable negative voltage rail. This article will discuss the LM7912 basics, pinout, internal circuit operation, functional block diagram, specifications, features, application circuit, alternatives, and comparison with other voltage regulators.

LM7912 is a fixed –12V negative linear voltage regulator from the LM79XX series. It is designed to provide a stable –12V output from a more negative input voltage, such as –15V or –18V. This device is widely used in dual power supply systems that require both positive and negative voltage rails.
The LM7912 is commonly available in a TO-220 package and can deliver up to around 1A to 1.5A of output current with proper heat sinking. It requires only a few external components, typically input and output capacitors, making circuit design simple and reliable. It features built-in current limiting, thermal shutdown, and safe area protection to prevent damage from overload or overheating.
If you are interested in purchasing the LM7912, feel free to contact us for pricing and availability.


| Pin Number | Pin Name | Description |
| 1 | Ground (GND) | Connected to system ground. Reference point for regulation. |
| 2 | Input (VIN) | Unregulated negative input voltage (typically –15V to –24V). |
| 3 | Output (VOUT) | Regulated –12V output voltage. |
• LM7912CT
• LM7912CV
• MC7912
• KA7912
• L7912CV
• L7912ACV
• UA7912
• NJM7912
• BD7912F
• TL7912
The LM7912 internal circuit diagram shows how the regulator converts an unregulated negative input voltage into a stable –12V output. On the left side of the diagram, the input stage includes protection components and a start-up bias network. These transistors and resistors prepare the internal circuitry and help protect the device from reverse polarity and abnormal input conditions.

In the middle section, a voltage reference and error amplifier are formed using multiple transistors and precision resistors. This part compares a portion of the output voltage (feedback signal) with an internal reference voltage. If the output becomes too negative or not negative enough, the error amplifier adjusts the drive to the pass transistor to correct it.
On the right side, the large output transistor acts as the series pass element. It controls the current flowing from input to output to maintain a constant –12V. Protection circuits, including current limiting and thermal shutdown networks, are also integrated to prevent damage during overload or overheating.
The LM7912 functional block diagram shows how the regulator maintains a stable –12V output using a feedback control system. The voltage reference block generates a precise internal reference voltage. This reference is applied to the inverting input of the error amplifier, while the non-inverting input receives feedback from the output through the resistor network (R1 and R2). This comparison allows the regulator to detect any change in output voltage.

The error amplifier acts as the control unit. If the output voltage shifts from –12V, the amplifier adjusts its output signal to correct the difference. This signal drives the series pass transistors Q1 and Q2, which regulate the current flowing from input to output.
The pass transistors (Q1 and Q2) control how much current is delivered to the load. By increasing or decreasing conduction, they keep the output voltage stable even when input voltage or load current changes.
The protection circuitry monitors output current through the sense resistor (Rsc). If excessive current or overheating occurs, it limits the drive to the pass transistors, preventing damage. The diagram represents a closed-loop linear regulator system designed for stable and protected negative voltage regulation.
| Parameter | Specification | Units |
| Output Voltage | -12V (Typ), -11.5V to -12.5V | V |
| Line Regulation | 5mV (Typ), 80mV (Max) | mV |
| Load Regulation | 15mV (Typ), 200mV (Max) | mV |
| Quiescent Current | 1.5mA (Typ), 3mA (Max) | mA |
| Quiescent Current Change | 0.5mA | mA |
| Output Noise Voltage | 300µV (Typ) | µV |
| Ripple Rejection | 70dB (Typ), 54dB (Min) | dB |
| Dropout Voltage | 1.1V (Typ) | V |
| Peak Output Current | 2.2A (Typ) | A |
| Operating Junction Temperature | 0°C to +125°C | °C |
| Storage Temperature Range | -65°C to +150°C | °C |
| Maximum Input Voltage | -35V | V |
| Maximum Input-Output Differential | 30V | V |
• Fixed –12V Output Voltage - Provides a stable and preset –12V output without the need for external adjustment components.
• Thermal Overload Protection - Automatically shuts down or limits operation when the internal temperature becomes too high, preventing device damage.
• Short-Circuit Protection - Protects the regulator if the output is accidentally shorted to ground by limiting the output current.
• Safe Operating Area (SOA) Protection - Ensures the internal power transistor operates within safe limits during high voltage or high current conditions.
• High Ripple Rejection - Effectively reduces AC ripple from the input supply, providing a clean and stable DC output.
• Up to 1.5A Output Current - Capable of delivering output current suitable for medium-power analog and digital circuits.
• 4% Output Voltage Tolerance - Maintains output voltage accuracy within a tight tolerance range.
• Low Output Noise - Designed to minimize electrical noise, making it suitable for audio and precision analog applications.
• Good Line Regulation - Keeps the output voltage stable even when the input voltage varies.
• Good Load Regulation - Maintains steady output voltage despite changes in load current.
• Internal Current Limiting - Prevents excessive output current during overload conditions.
• Wide Input Voltage Range - Supports input voltages significantly lower than –12V (within maximum ratings) for reliable regulation.
• Simple External Component Requirement - Requires only two external capacitors for stable operation, making circuit design easy.
• Available in Standard TO-220 Package - Easy to mount on heat sinks for better thermal performance.

The circuit diagram shows the LM7912 used to produce a stable –12V output from a negative input source. Pin 2 (VIN) is connected to a –14V supply, which must be more negative than –12V for proper regulation. Pin 1 is connected to ground, which serves as the reference point of the circuit. Pin 3 (VOUT) delivers the regulated –12V output to the load. The load is connected between the output and ground, receiving a constant negative voltage.
A 10µF capacitor is placed between VIN and ground to filter input ripple and reduce noise. This capacitor helps smooth the incoming voltage and improves stability. A 1µF capacitor is connected between VOUT and ground to prevent oscillation and maintain a steady output voltage. Correct capacitor polarity is important because this is a negative regulator—the positive terminals of the capacitors are tied to ground.
To use the LM7912, provide a negative input voltage at least 2V to 3V lower than –12V (for example, –14V or lower). Connect the ground properly, add the recommended capacitors close to the pins, and attach the load to the output. Once powered, the regulator automatically maintains a constant –12V output even if the input voltage or load current changes.
• Dual power supply systems (±12V rails)
• Audio amplifiers and preamplifiers
• Operational amplifier circuits
• Analog signal processing circuits
• Instrumentation systems
• Industrial control systems
• Communication equipment
• Test and measurement equipment, etc.
| Feature | LM7912 | LM7812 | LM337 | LM7905 |
| Output Type | Fixed Negative | Fixed Positive | Adjustable Negative | Fixed Negative |
| Output Voltage | -12V | +12V | Adjustable (-1.25V to -37V) | -5V |
| Output Current | Up to 1.5A | Up to 1.5A | Up to 1.5A | Up to 1.5A |
| Polarity | Negative | Positive | Negative | Negative |
| External Resistors Needed | No | No | Yes (for setting voltage) | No |
| Typical Dropout Voltage | ~1.1V | ~2V | ~2V | ~1.1V |
| Protection Features | Thermal, Short-Circuit, SOA | Thermal, Short-Circuit | Thermal, Short-Circuit | Thermal, Short-Circuit |
| Common Applications | Dual supplies, Analog circuits | General +12V supply | Adjustable negative supply | -5V supply systems |

The LM7912’s internal design combines a precision voltage reference, error amplifier, and pass transistor with comprehensive protection features such as thermal shutdown and current limiting. With good line and load regulation, low noise, and strong ripple rejection, it is suitable for dual power supplies, audio systems, operational amplifier circuits, and industrial equipment. Whether used in new designs or as a replacement for equivalent models, the LM7912 remains a reliable and widely adopted solution for negative voltage regulation applications.