MSP430F2418TPMR

ACTIVE

Features for the MSP430F2418

• Low supply voltage range: 1.8 V to 3.6 V

• Ultra-low power consumption

• Active mode: 365 µA at 1 MHz, 2.2 V

• Standby mode (VLO): 0.5 µA

• Off mode (RAM retention): 0.1 µA

• Wake up from standby mode in less than 1 µs

• 16-bit RISC architecture, 62.5-ns instruction cycle time

• Three-channel internal DMA (MSP430F261x only)

• 12-bit analog-to-digital converter (ADC) with internal reference, sample-and-hold, and autoscan feature

• Dual 12-bit digital-to-analog converters (DACs) with synchronization (MSP430F261x only)

• 16-bit Timer_A with three capture/compare registers

• 16-bit Timer_B with seven capture/compare registers with shadow registers

• On-chip comparator

• Four universal serial communication interfaces (USCIs)

• I2C

• Synchronous SPI

• Enhanced UART supporting automatic baud-rate detection

• IrDA encoder and decoder

• Synchronous SPI

• USCI_A0 and USCI_A1

• USCI_B0 and USCI_B1

• Supply voltage supervisor and monitor with programmable level detection

• Brownout detector

• Bootloader (BSL)

• Serial onboard programming, no external programming voltage needed, programmable code protection by security fuse

• Family members (also see Device Comparison)

• 120KB + 256 bytes flash memory

• 4KB RAM

• 116KB + 256 bytes flash memory

• 8KB RAM

• 92KB + 256 bytes flash memory

• 8KB RAM

• 92KB + 256 bytes flash memory

• 4KB RAM

• 120KB + 256 bytes flash memory

• 4KB RAM

• 116KB + 256 bytes flash memory

• 8KB RAM

• 92KB + 256 bytes flash memory

• 8KB RAM

• 92KB + 256 bytes flash memory

• 4KB RAM

• MSP430F2416

• MSP430F2417

• MSP430F2418

• MSP430F2419

• MSP430F2616

• MSP430F2617

• MSP430F2618

• MSP430F2619

• Available in 80-pin quad flat pack (LQFP), 64-pin LQFP, and 113-pin ball grid array (nFBGA)

All trademarks are the property of their respective owners.

Description for the MSP430F2418

The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The calibrated digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.

The MSP430F261x and MSP430F241x series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit ADC, a comparator, two 12-bit DACs, four USCI modules, DMA, and up to 64 I/O pins. The MSP430F241x devices are identical to the MSP430F261x devices, with the exception that the DAC12 and the DMA modules are not implemented.

The LQFP-64 package is also available as a nonmagnetic package for medical imaging applications.

For complete module descriptions, see the MSP430F2xx, MSP430G2xx Family User’s Guide.