The HCPL-063L-500E digital optocoupler is an optically coupled gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 15 kV/ms.This unique design provides maximum AC and DC circuit isolation while achieving LVTTL/LVCMOS compatibility. The optocoupler AC and DC operational parameters are guaranteed from -40 degrees C to 85 degrees C allowing trouble-free system performance.It is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are recommended for use in extremely high ground or induced noise environments. It is available in an 8-pin DIP and industry standard SO-8 package.
Feature
Low power consumption
15 kV/ms minimum Common Mode Rejection (CMR) at VCM = 50 V
High speed: 15 MBd typical
LVTTL/LVCMOS compatible
Low input current capability: 5 mA
Guaranteed AC and DC performance over temperature: -40 degrees C to 85 degrees C
Available in 8-pin DIP, SOIC-8
Strobable output (single channel products only)
Safety approvals: UL, CSA, IEC/EN/ DIN EN 60747-5-2
Options available are:
060 = IEC/EN/DIN EN 60747-5-2 Option500 = Tape and Reel Package OptionXXXE = Lead Free Option
Applications
Isolated line receiver
Computer-peripheral interfaces
Microprocessor system interfaces
Digital isolation for A/D, D/A conversion
Switching power supply
Instrument input/output isolation
Ground loop elimination
Pulse transformer replacement
Field buses
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
