The MPM3804GG-Z is a monolithic, step-down, switch-mode converter with built-in, internal power MOSFETs and an inductor. The MPM3804GG-Z achieves 0.6A of continuous output current from a 2.3V to 5.5V input voltage range with excellent load and line regulation. The output voltage can be regulated as low as 0.6V. Only input capacitors, output capacitors, and feedback (FB) resistors are required to complete the design.The constant-on-time (COT) control scheme provides a fast transient response, high light-load efficiency, and easy loop stabilization.Full protection features include cycle-by-cycle current limiting and thermal shutdown.The MPM3804GG-Z is ideal for a wide range of applications, including high-performance DSPs, wireless power, portable and mobile devices, and other low-power systems.The MPM3804GG-Z requires a minimal number of readily available, standard, external components and is available in an ultra-small QFN-10 (2mmx2mm) package. freesky Electronics is an authorized Monolithic Power Systems distributor.
Feature
Up to 91% Peak Efficiency
Low IQ: 11µA
Wide 2.3V to 5.5V Operating Input Range
Output Voltage as Low as 0.6V
100% Duty Cycle in Dropout
0.6A Output Current
120mO and 80mO Internal Power MOSFETs
2.4MHz Frequency
EN and Power Good for Power Sequencing
Cycle-by-Cycle Over-Current Protection (OCP)
0.5ms Internal Soft-Start Time
Output Discharge
Short-Circuit Protection (SCP) with Hiccup Mode
Thermal Shutdown
Stable with Low-ESR Output Ceramic Capacitors
Ultra-Small, 2mmx2mmx0.9mm QFN-10 Package
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
