The ADV7391BCPZ is a High Speed SD/HD Video Encoder with three 2.7/3.3V 10-bit video DACs that provide support for composite (CVBS), S-Video (Y-C) or component (YPrPb/RGB) analogue outputs in either standard definition (SD) or high definition (HD) video formats. Optimized for low power operation and requiring few external components, this encoder is ideally suited to portable and power-sensitive applications requiring TV-out functionality. Cable detection and DAC auto power-down features ensure that power consumption is kept to a minimum. The ADV7391BCPZ has an 8-bit video input port that supports SD video formats over an SDR interface and HD video formats over a DDR interface. It has a 16-bit video input port that can be configured in a variety of ways. SD RGB input is supported. The encoder supports embedded EAV/SAV timing codes, external video synchronization signals and the I²C® and communication protocol.
Feature
3 High quality, 10-bit video DACs
Supports multiformat video input
Supports multiformat video output
Advanced power management
74.25MHz 8-/10-/16-bit high definition input support
Copy generation management system (CGMS)
Closed captioning and wide screen signalling (WSS)
Integrated subcarrier locking to external video source
Complete on-chip video timing generator
On-chip test pattern generation
Controlled edge rates for start and end of active video
Separate pedestal control on component and composite/S-Video output
Applications
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
