The LTC2601/LTC2611/LTC2621IDD#TRPBF are single 16-, 14- and 12-bit, 2.5V-to-5.5V rail-to-rail voltage output DACs in a 10-lead DFN package. They have built-in high performance output buffers and are guaranteed monotonic.
These parts establish new board-density benchmarks for 16- and 14-bit DACs and advance performance standards for output drive and load regulation in single-supply, voltage-output DACs.
The parts use a simple SPI/MICROWIRE compatible 3-wire serial interface which can be operated at clock rates up to 50MHz. Daisy-chain capability, hardware CLR and asynchronous DAC update (LDAC) pins are included.
The LTC2601/LTC2611/LTC2621IDD#TRPBF incorporate a power-on reset circuit. During power-up, the voltage outputs rise less than 10mV above zero scale until a valid write and update take place. The power-on reset circuit resets the LTC2601-1/LTC2611-1/LTC2621-1 to midscale. The voltage outputs stay at midscale until a valid write and update take place.
Feature
Smallest Pin-Compatible Single DACs:
LTC2601: 16 Bits
LTC2611: 14 Bits
LTC2621: 12 Bits
Guaranteed Monotonic Over Temperature
Wide 2.5V to 5.5V Supply Range
Low Power Operation: 300µA at 3V
Power Down to 1µA, Max
High Rail-to-Rail Output Drive (±15mA, Min)
Double-Buffered Data Latches
Asynchronous DAC Update Pin
LTC2601-1/LTC2611-1/LTC2621-1: Power-On Reset to Midscale
Tiny (3mm x 3mm) 10-Lead DFN Package
Applications
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
