The INA139NA/250 and INA169 are high-side, unipolar, current shunt monitors. Wide inputcommon-mode voltage range, high-speed, low quiescent current, and tiny SOT-23 packaging enable usein a variety of applications.
Input common-mode and power-supply voltages are independent and can range from 2.7 V to40 V for the INA139NA/250 and 2.7 V to 60 V for the INA169. Quiescent current is only 60 μA, whichpermits connecting the power supply to either side of the current measurement shunt with minimalerror.
The device converts a differential input voltage to a current output. This current isconverted back to a voltage with an external load resistor that sets any gain from 1 to over 100.Although designed for current shunt measurement, the circuit invites creative applications inmeasurement and level shifting.
Both the INA139NA/250 and INA169 are available in 5-pin SOT-23 packages. The INA139NA/250 device isspecified for the –40°C to +125°C temperature range, and the INA169 is specified from –40°C to+85°C.
Feature
Complete Unipolar High-Side Current Measurement Circuit
Wide Supply and Common-Mode Range
INA139: 2.7 V to 40V
INA169: 2.7 V to 60 V
Independent Supply and InputCommon-Mode Voltages
Single Resistor Gain Set
LowQuiescent Current: 60 μA (Typical)
5-Pin, SOT-23Packages
All trademarks are the property of their respective owners.
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
