The S29AL016J70TFI010 is a 16MB CMOS Flash Memory organized as 2097152 bytes or 1048576 words. The word-wide data appears on DQ15-DQ0, the byte-wide data appears on DQ7-DQ0. This device is designed to be programmed in-system with the standard system 3VCC supply. The device can also be programmed in standard EPROM programmers. The device offers access time of 70ns allowing high speed microprocessors to operate without wait states. To eliminate bus contention the device has separate chip enable, write enable and output enable controls. The device requires only a single 3V power supply for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. The S29AL016J is entirely command set compatible with the JEDEC single-power-supply flash standard. Register contents serve as input to an internal state-machine that controls the erase and programming circuitry.
Feature
Top boot sector device
Manufactured on 110nm process technology - Fully compatible with 200nm S29AL016D
Secured silicon sector region
Flexible sector architecture
Hardware method of locking a sector to prevent any program or erase operations within that sector
Reduces overall programming time when issuing multiple program command sequences
Pinout and software compatible with single-power supply flash
Superior inadvertent write protection
High performance
Ultralow power consumption
Cycling endurance - 1000000 cycles per sector typical
Data retention - 20 years typical
Erase suspend/erase resume
Data# polling and toggle bits
Provides a hardware method of detecting program or erase cycle completion
Hardware method to reset the device to reading array data
Provides a software method of detecting program or erase operation completion
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
