The HCPL-0201-500E optocoupler is an optically-coupled logic gate. It contains an GaAsP LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, illuminating the need for additional waveshaping.
The electrical and switching characteristics of the HCPL-0201-500E is guaranteed from -40oC to 85oC and a VCC from 4.5 volts to 20 volts. Low IF and wide VCC range allows compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high speed couplers. Logic signals are transmitted with a typical propagation delay of 150 ns.
Feature
Wide Operating VCC Range: 4.5 to 20 Volts
300 ns Propagation Delay Guaranteed over the Full Temperature Range
5 Mbd Typical Signal Rate
Low Input Current (1.6 mA to 1.8 mA)
Hysteresis
Totem Pole Output (No Pullup Resistor Required)
Available in 8-Pin DIP, SOIC-8, Widebody Packages
Guaranteed Performance from -40 oC to 85oC
Safety Approval:
UL Recognized - 3750 V rms for 1 min. per UL1577 CSA Approved
300 = Gull Wing Surface Mount Option500 = Tape and Reel Packaging OptionXXXE = Lead Free Option
Applications
Isolation of High Speed Logic Systems
Computer-Peripheral Interfaces
Microprocessor System Interfaces
Ground Loop Elimination
Pulse Transformer Replacement
High Speed Line Receiver
Power Control Systems
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
