The P6SMB10CA series is designed specifically to protect sensitive electronic equipment from voltage transientsinduced by lightning and other transient voltage events.
Feature
600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Excellent clamping capability
Low incremental surge resistance
Typical IR less than 1μA when VBR min>12V
Optimized surface mount footprint for minimal PCB space impact
Low profile package
Typical failure mode due to exceeding maximum ratings is a short circuit condition
Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A
IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
EFT protection of data lines in accordance with IEC 61000-4-4
Built-in strain relief
Fast response time: typically less than 1.0ps from 0V to VBR min
High temperature to reflow soldering guaranteed: 260°C/40sec
VBR @ TJ = VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
UL Recognized compound meeting flammability classification V-0
Meet MSL level1, per J-STD-020, LF maximun peak of 260°C
Matte tin lead–free plated
Halogen free and RoHS compliant
Pb-free E3 means 2ND level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01)
Applications
TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
