The SA615DK/01,118 is a high performance monolithic low-power FM IF system incorporating amixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector,muting, logarithmic Received Signal Strength Indicator (RSSI), and voltage regulator. TheSA615DK/01,118 combines the functions of NXP Semiconductors SA602A and SA604A, butfeatures a higher mixer input intercept point, higher IF bandwidth (25 MHz) andtemperature compensated RSSI and limiters permitting higher performance application.The SA615DK/01,118 is available in 20-lead SO (surface-mounted miniature package) and 20-leadSSOP (shrink small outline package).
The SA605 and SA615DK/01,118 are functionally the same device types. The difference betweenthe two devices lies in the guaranteed specifications. The SA615DK/01,118 has a higher ICC, lowerinput third-order intercept point, lower conversion mixer gain, lower limiter gain, lower AMrejection, lower SINAD, higher THD, and higher RSSI error than the SA615. Both theSA605 and SA615DK/01,118 devices meet the EIA specifications for AMPS and TACS cellular radioapplications.
Low power consumption: 5.7 mA typical at 6 V
Mixer input to >500 MHz
Mixer conversion power gain of 13 dB at 45 MHz
Mixer noise figure of 4.6 dB at 45 MHz
XTAL oscillator effective to 150 MHz (L/C oscillator to 1 GHz local oscillator can beinjected)
102 dB of IF amplifier/limiter gain
25 MHz limiter small signal bandwidth
Temperature-compensated logarithmic Received Signal Strength Indicator (RSSI) witha dynamic range in excess of 90 dB
Two audio outputs — muted and unmuted
Low external component count; suitable for crystal/ceramic/LC filters
Excellent sensitivity: 0.22 μV into 50 Ω matching network for 12 dB SINAD(Signal-to-Noise-and-Distortion ratio) for 1 kHz tone with RF at 45 MHz and IF at455 kHz
SA615 meets cellular radio specifications
ESD hardened
Cellular radio FM IF
High performance communications receivers
Single conversion VHF/UHF receivers
SCA receivers
RF level meter
Spectrum analyzer
Instrumentation
FSK and ASK data receivers
Log amps
Wideband low current amplification
Power Gain
13 dB
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Package / Case
SSOP-20
Minimum Operating Temperature
- 40 C
Packaging
Reel
Factory Pack Quantity
2500
Part # Aliases
SA615DK/01-T