The QPL9095 is a high-linearity, ultra-low noise gain block amplifier with a bypass mode functionality integrated in the product. At 900MHz, the amplifier typically provides 22 dB gain, +34 dBm OIP3, and 0.6 dB noise figure while drawing 50 mA current from a +4.2 V supply. The QPL9095 is internally matched using a high performance E-pHEMT process and only requires four external components for operation from a single positive supply: an external RF choke and blocking/bypass capacitors. This low noise amplifier contains an internal active bias to maintain high performance over temperature.
The QPL9095 is optimized for the 500MHz – 1000MHz frequency band and is targeted for wireless infrastructure. The QPL9095 is packaged in a 2 x 2 mm DFN.
Feature
0.5 - 1.0 GHz Operational Bandwidth
LNA with Integrated Bypass Mode
Ability to turn LNA and Bypass Mode OFF
Ultra Low Noise Figure, 0.6 dB at 0.9 GHz
22 dB Gain at 0.9 GHz
34 dBm OIP3 at 0.9 GHz
Internally Matched
Positive supply only, 3.3 - 5 V
Applications
Base Station Receivers
Tower Mount Amplifiers
Repeaters
FDD-LTE, TDD-LTE, WCDMA
General Purpose Wireless
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
