The TRS3232EIDBR device consists of two line drivers, two-line receivers, and a dualcharge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins,including GND).
The device meets the requirements of TIA/EIA-232-F and provides the electrical interfacebetween an asynchronous communication controller and the serial-port connector. The charge pump andfour small external capacitors allow operation from a single 3-V to 5.5-V supply. The devicesoperate at data signaling rates up to 250 kbps and a maximum of 30-V/μs driver output slewrate.
Feature
ESD Protection for RS-232 Bus Pins
±15 kV (HBM)
±8 kV (IEC61000-4-2, Contact Discharge)
±15 kV (IEC61000-4-2, Air-Gap Discharge)
Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28Standards
Operates With 3-V to 5.5-V VCC Supply
Operates up to 250 kbps
Two Drivers and Two Receivers
Low Supply Current: 300 μA (Typical)
External Capacitors: 4 × 0.1 μF
Accepts 5-V Logic Input With 3.3-V Supply
Pin Compatible to Alternative High-Speed Devices (1 Mbps)
All trademarks are the property of their respective owners.
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
