The LTC2862/LTC2863/LTC2864/LTC2865 are low power, 20Mbps or 250kbps RS485/RS422 transceivers operating on 3V to 5.5V supplies that feature ±60V overvoltage fault protection on the data transmission lines during all modes of operation, including power-down. Low EMI slew rate limited data transmission is available in a logic-selectable 250kbps mode in the LTC2865 and in 250kbps versions of the LTC2862-LTC2864. Enhanced ESD protection allows these parts to withstand ±15kV HBM on the transceiver interface pins without latch-up or damage.
Extended ±25V input common mode range and full fail-safe operation improve data communication reliability in electrically noisy environments and in the presence of large ground loop voltages.
Part NumberDuplexEnablesMax Data RateVL PinLTC2862-1HalfYes20MNoLTC2862-2HalfYes250kNoLTC2863-1FullNo20MNoLTC2863-2FullNo250kNoLTC2864-1FullYes20MNoLTC2864-2FullYes250kNoLTC2865FullYes20M/250kYes
Feature
Protected from Overvoltage Line Faults to ±60V
3V to 5.5V Supply Voltage
20Mbps or Low EMI 250kbps Data Rate
±15kV ESD Interface Pins, ±8kV All Other Pins
Extended Common Mode Range: ±25V
Guaranteed Fail-safe Receiver Operation
High Input Impedance Supports 256 Nodes
1.65V to 5.5V Logic Supply Pin (VL) for Flexible Digital Interface (LTC2865)
MP-Grade Option Available (–55°C to 125°C)
Fully Balanced Differential Receiver Thresholds for Low Duty Cycle Distortion
Current Limited Drivers and Thermal Shutdown
Pin Compatible with LT1785 and LT1791
Available in DFN and Leaded Packages
Applications
Supervisory Control and Data Acquisition (SCADA)
Industrial Control and Instrumentation Networks
Automotive and Transportation Electronics
Building Automation, Security Systems and HVAC
Medical Equipment
Lighting and Sound System Control
(Picture: Pinout)
(Picture: Diagram)
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
