The MAX4326ESA+ is a dual, low cost, low power, rail to rail I/O op-amp in 8 pin NSOIC package. The operational amplifier combines wide bandwidth and excellent DC accuracy with rail to rail operation at the inputs and outputs. These Unity gain-stable amplifiers are capable of driving 250 ohm loads and have a 5MHz gain-bandwidth product. With their rail to rail input common mode range and output swing, these amplifiers are ideal for low voltage, single supply operation. In addition, low offset voltage and high speed make them the ideal signal conditioning stages. Typical applications include data acquisition systems, RSSI systems, signal conditioning and PA biasing.
Feature
Supply voltage range is ±1.2V to ±3.25V, 2.4V to 6.5V
Operating temperature range from -40°C to 85°C
Rail to rail input common mode voltage range
Rail to rail output voltage swing
Quiescent current per amplifier is 650µA
Offset voltage is 700µV
No phase reversal for overdriven inputs
Unity gain stable for capacitive loads up to 500pF
Power supply rejection ratio is 100dB and common mode rejection ratio is 94dB
Applications
Automotive Sensors
Base Station/Wireless Infrastructure
Battery-Powered Instruments
Computers: Desktops, Workstations, and Servers
Computers: Motherboards
Computers: Notebook
Data Acquisition Systems
GPS Solutions
Low-Power, Low-Voltage Applications
MP3 Docking Stations: Mid Level
PA Biasing
Portable Equipment
Programmable Logic Controllers (PLCs)
RSSI Systems
Set-Top Boxes
Signal Conditioning
(Picture: Diagram)
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
