The STM32F407VGT6 is based on the high performance ARM Cortex-M4 32 bit RISC core operating at a frequency of up to 168MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single precision data processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32F407VGT6 incorporates high speed embedded memories (Flash memory up to 1Mbyte, up to 192Kbytes of SRAM), up to 4Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32 bit multi AHB bus matrix.
Feature
Up to 1Mbyte of Flash memory
Up to 192+4 Kbytes of SRAM including 64Kbyte of CCM (core coupled memory) data RAM
Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
LCD parallel interface, 8080/6800 modes
Clock, reset and supply management
4MHz to 26 MHz crystal oscillator
Internal 16 MHz factory-trimmed RC (1% accuracy)
32kHz oscillator for RTC with calibration
Internal 32kHz RC with calibration
Sleep, Stop and Standby modes
VBAT supply for RTC, 20×32 bit backup
3 × 12bit, 2.4MSPS A/D converters
2 × 12bit D/A converters
General purpose DMA controller with FIFOs and burst support
Up to 17 timers
Debug mode
Up to 140 I/O ports with interrupt capability
Up to 136 fast I/Os up to 84MHz
Up to 138 5V tolerant I/Os
Up to 15 communication interfaces
(Picture: Diagram)
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
