The AD5628BRUZ-2 is a low power octal 12-bit buffered voltage-output Digital-to-analog Converter (DAC) operates from a single 2.7 to 5.5V supply. The on-board reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. The part contains a power-down feature that reduces the current consumption of the device to 400nA at 5V and provides software-selectable output loads while in power-down mode for any DAC channels. The outputs of DAC can be updated simultaneously using the LDAC function with the added functionality of user-selectable DAC channels to simultaneously update. There is also an asynchronous CLR that updates all DAC to user-programmable code-zero scale, midscale or full scale. It utilizes a versatile 3-wire serial interface that operates at clock rates of up to 50 MHz and is compatible with standard SPI®, QSPI™, MICROWIRE™ and DSP interface standards.
Feature
Guaranteed monotonic by design
Power-on reset to zero scale or midscale
3 Power-down functions
Hardware LDAC and LDAC override function
CLR function to programmable code
Rail-to-rail operation
Applications
Process control
Data acquisition systems
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
(Picture: Pinout)
(Picture: Diagram)
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
