The TJA1052IT/5Y is a high-speed CAN Transceiver IC, provides a galvanically isolated interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The TJA1052IT/5Y is specifically targeted at electric vehicles (EV) and hybrid electric vehicles (HEV), where galvanic isolation barriers are needed between the high- and low-voltage parts.
Feature
Loop delay symmetry timing enables communication at data rates up to 2Mbps in CAN FD fast phase
Flawless Cooperation Between Isolator and Transceiver
Fewer Components Improves Reliability in Applications
Guaranteed Performance (Example: Maximum Loop Delay <220ns)
Electrical Transient Immunity of 45kV/µs (Typical)
AEC-Q100 Qualified
Suitable for use in 12 and 24V Systems, Compatible with 3 to 5V Microcontrollers
Bus Common Mode Voltage (Vcm) = ±25V
Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI)
Dark Green Product (Halogen-free)
Functional Behaviour Predictable Under All Supply Conditions
Transceiver Disengages from Bus when Not Powered up (Zero Load)
Up to 5kV (RMS) Rated Isolation
Three Versions Available (1kV, 2.5kV and 5kV)
Voltage Compliant with UL 1577, IEC 61010 and IEC 60950
5kV (RMS) Rated Isolation Voltage Compliant with UL 1577, IEC 61010 and IEC 60950
Supports ISO6469 Electrically Propelled Road Vehicles, Safety Specifications
High ESD Handling Capability on Bus Pins
Bus Pins Protected Against Transients in Automotive Environments
Transmit Data (TXD) Dominant Time-out Function
Applications
Communications & Networking, Automotive
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
