All trademarks are the property of their respective owners.
Description
The TPS54824RNVR is afull-featured 17-V (19-V maximum), 8-Asynchronous step-down DC/DC converter in a 3.5 mm × 3.5 mm HotRod? QFN package.
The device is optimized for small solution size through high efficiency and integratingthe high-side and low-side MOSFETs. Further space savings are achieved through peak current modecontrol, which reduces component count, and by selecting a high switching frequency, reducing theinductor footprint.
The peak current mode control simplifies the loop compensation and provides fasttransient response. Cycle-by-cycle peak current limiting on the high-side and low-side sourcingcurrent limit protects the device in overload situations. Hiccup limits MOSFET power dissipation ifa short circuit or over loading fault persists.
A power good supervisor circuit monitors the regulator output. The PGOOD pin is anopen-drain output and goes high impedance when the output voltage is in regulation. An internaldeglitch time prevents the PGOOD pin from pulling low unless a fault has occurred.
A dedicated EN pin can be used to control the regulator on/off and adjust the inputundervoltage lockout. The output voltage start-up ramp is controlled by the SS/TRK pin, whichallows operation as either a standalone power supply or in tracking situations.
Feature
Small3.5-mm × 3.5-mm HotRod? QFN package
Integrated14.1-m? and 6.1-m? MOSFETs
Peak current mode control with fast transientresponse
200-kHz to 1.6-MHz fixed switchingfrequency
Synchronizes to external clock
0.6-V voltagereference ±0.85% over temperature
0.6-V to 12-V output voltagerange
Hiccup Current Limit
Safe start-up into pre-biasedoutput voltage
Adjustable soft start and powersequencing
Adjustable input undervoltage lockout
3-μAshutdown current
Power good output monitor for undervoltage andovervoltage
Output overvoltage protection
Non-latch thermalshutdown protection
–40°C to 150°C operating junctiontemperature
All trademarks are the property of their respective owners.
Description
The TPS54824 is afull-featured 17-V (19-V maximum), 8-Asynchronous step-down DC/DC converter in a 3.5 mm × 3.5 mm HotRod? QFN package.
The device is optimized for small solution size through high efficiency and integratingthe high-side and low-side MOSFETs. Further space savings are achieved through peak current modecontrol, which reduces component count, and by selecting a high switching frequency, reducing theinductor footprint.
The peak current mode control simplifies the loop compensation and provides fasttransient response. Cycle-by-cycle peak current limiting on the high-side and low-side sourcingcurrent limit protects the device in overload situations. Hiccup limits MOSFET power dissipation ifa short circuit or over loading fault persists.
A power good supervisor circuit monitors the regulator output. The PGOOD pin is anopen-drain output and goes high impedance when the output voltage is in regulation. An internaldeglitch time prevents the PGOOD pin from pulling low unless a fault has occurred.
A dedicated EN pin can be used to control the regulator on/off and adjust the inputundervoltage lockout. The output voltage start-up ramp is controlled by the SS/TRK pin, whichallows operation as either a standalone power supply or in tracking situations.
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
