Charger/power path - 2A output current on power path
Charger/power path - 20V tolerant USB and AC inputs
Charger/power path - thermal regulation, safety timers
Charger/power path - temperature sense input
Step-down converter (DCDC1, 2, 3) - Three step-down converters with integrated switching FETs
Step-down converter (DCDC1, 2, 3) - Power save mode at light load current
Step-down converter (DCDC1, 2, 3) - 100% duty cycle for lowest dropout
Step-down converter (DCDC1, 2, 3) - Passive discharge to ground when disabled
LDOs (LDO1, 2) - two adjustable LDOs
LDOs (LDO1, 2) - LD02 can be configured to track DCDC3
LDOs (LDO1, 2) - typical 15pA quiescent current
Load switches (LDO3, 4) - two independent load switches that can be configured as LDOs
WLED driver - Internally generated PWM for dimming control
WLED driver - supports two strings of up to 10 LEDs at 25mA each
WLED driver - Internal low-side current sinks
Protection - Undervoltage lockout and battery fault comparator
Protection - Always-on push-button monitor
Protection - Hardware reset pin
Interface - password protected I2C registers
Applications
Battery Management, Display (LED Drivers), Handheld/Mobile Devices, Power Supply
Voltage Supply
2.75V ~ 5.8V
Operating Temperature
-40??C ~ 105??C
Mounting Type
Surface Mount
Package / Case
48-VFQFN Exposed Pad
Supplier Device Package
48-VQFN (6x6)
ModelsDescriptionOperation
TPS535PERKINELMER, DIP-4Compare
TPH5R906NHTOSHIBA, SOP-8Compare
TPH7R506NHTOSHIBA, SOP8Compare
TPS613-BTOSHIBA, DIP2PCompare
TPIC0109AOBB, QFN16Compare
TPIC1391Driver IC, BB, TSSOPCompare