All trademarks are the property of their respective owners.
Description
The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimizedfor applications with high power density. A high switching frequency of typically 2.5 MHz allowsthe use of small inductors and provides fast transient response as well as high output-voltageaccuracy through the use of the DCS-Control? topology.
With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suitedfor systems powered from intermediate bus power rails. The devices support up to 3-A continuousoutput current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). Theoutput-voltage startup ramp is controlled by the soft-start pin, which allows operation as either astandalone power supply or in tracking configurations. Power sequencing is also possible byconfiguring the enable and open-drain power-good pins.
In power save mode, the devices show quiescent current of about 17 μA fromVIN. Power save mode which is entered automatically and seamlessly if theload is small, maintains high efficiency over the entire load range. In shutdown mode, the devicesare turned off and shutdown current consumption is less than 2 μA. The devices are packaged in a16-pin VQFN package measuring 3 × 3 mm (RGT).
Feature
DCS-Control?Topology
Qualified for Automotive Applications
AEC-Q100Qualified With the Following Results:
Device Temperature Grade: –40°C to125°C Operating Junction Temperature Range
Device HBM ESD Classification Level2
Device CDM ESD Classification LevelC4B
Input Voltage Range: 3 to 17V
Adjustable Output Voltage from 0.9 to 6V
Pin-Selectable OutputVoltage (nominal, + 5%)
Programmable Soft Start and Tracking
Seamless Power Save Mode Transition
Quiescent Current of 17μA(typ.)
Selectable Operating Frequency
Power Good Output
100% Duty Cycle Mode
Short Circuit Protection
Over Temperature Protection
Pin to Pin Compatible with TPS62150A-Q1
Available ina 3 × 3 mm, VQFN-16 Package
Create a Custom Design Using the TPS62130A-Q1 withtheWEBENCH? Power Designer
All trademarks are the property of their respective owners.
Description
The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimizedfor applications with high power density. A high switching frequency of typically 2.5 MHz allowsthe use of small inductors and provides fast transient response as well as high output-voltageaccuracy through the use of the DCS-Control? topology.
With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suitedfor systems powered from intermediate bus power rails. The devices support up to 3-A continuousoutput current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). Theoutput-voltage startup ramp is controlled by the soft-start pin, which allows operation as either astandalone power supply or in tracking configurations. Power sequencing is also possible byconfiguring the enable and open-drain power-good pins.
In power save mode, the devices show quiescent current of about 17 μA fromVIN. Power save mode which is entered automatically and seamlessly if theload is small, maintains high efficiency over the entire load range. In shutdown mode, the devicesare turned off and shutdown current consumption is less than 2 μA. The devices are packaged in a16-pin VQFN package measuring 3 × 3 mm (RGT).
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
