The LTC6246/LTC6247/LTC6248 are single/dual/quad low power, high speed unity gain stable rail-to-rail input/output operational amplifiers. On only 1mA of supply current they feature an impressive 180MHz gain-bandwidth product, 90V/μs slew rate and a low 4.2nV/√Hz of input-referred noise. The combination of high bandwidth, high slew rate, low power consumption and low broadband noise makes these amplifiers unique among rail-to-rail input/output op amps with similar supply currents. They are ideal for lower supply voltage high speed signal conditioning systems.
The LTC6246 family maintains high efficiency performance from supply voltage levels of 2.5V to 5.25V and is fully specified at supplies of 2.7V and 5.0V.
For applications that require power-down, the LTC6246 and the LTC6247IMS8#TRPBF in MS10 offer a shutdown pin which disables the amplifier and reduces current consumption to 42μA.
The LTC6246 family can be used as a plug-in replacement for many commercially available op amps to reduce power or to improve input/output range and performance.
Feature
Gain Bandwidth Product: 180MHz
–3dB Frequency (AV = 1): 120MHz
Low Quiescent Current: 1mA Max
High Slew Rate: 90V/μs
Input Common Mode Range Includes Both Rails
Output Swings Rail-to-Rail
Low Broadband Voltage Noise: 4.2nV/√Hz
Power-Down Mode: 42μA
Fast Output Recovery
Supply Voltage Range: 2.5V to 5.25V
Input Offset Voltage: 0.5mV Max
Input Bias Current: 100nA
Large Output Current: 50mA
CMRR: 110dB
Open Loop Gain: 45V/mV
Operating Temperature Range: –40°C to 125°C
Single in 6-Pin TSOT-23
Dual in MS8, 2mm × 2mm Thin DFN,TS0T-23, MS10
Quad in MS16
Applications
Low Voltage, High Frequency Signal Processing
Driving A/D Converters
Rail-to-Rail Buffer Amplifiers
Active Filters
Video Amplifiers
Fast Current Sensing Amplifiers
Battery Powered Equipment
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
