The TPS6513x is dual-output DC-DC converter generating a positive output voltage up to 15 V and a negative output voltage down to –15 V with output currents in a 200-mA range in typical applications, depending on input voltage to output voltage ratio. With a total efficiency up to 85%, the device is ideal for portable battery-powered equipment. The input voltage range of 2.7 V to 5.5 V allows the devices to be powered from batteries or from fixed 3.3-V or 5-V supplies. The TPS6513x comes in a small 4-mm × 4- mm VQFN-24 package. Together with a minimum switching frequency of 1.25 MHz, the device enables designing small power supply applications because it requires only a few small external components.
The converter operates with a fixed frequency PWM control topology and, if power-save mode is enabled, it uses a pulse-skipping mode at light-load currents. It operates with only 500-μA device quiescent current. Independent enable pins allow power-up and powerdown sequencing for both outputs. The device has an internal current limit overvoltage protection and a thermal shutdown for highest reliability under fault conditions.
Feature
2.7-V to 5.5-V Input Voltage Range
Dual Adjustable Output Voltages Up to 15 V and Down to –15 V
800-mA Typical Switch Current Limit at Boost and Inverter Main Switches at TPS65130
2-A Typical Switch Current Limit at Boost and Inverter Main Switches at TPS65131
Up to 89% Efficiency at Positive Output Voltage Rail
Up to 81% Efficiency at Negative Output Voltage Rail
Power-Save Mode for High Efficiency at Low Load Currents
Independent Enable Inputs for Power-Up and Power-Down Sequencing
Control Output for External PFET to Support Completely Disconnecting the Battery
Minimum 1.25-MHz Fixed Frequency PWM Operation
Thermal Shutdown
Overvoltage Protection on Both Outputs
1-μA Shutdown Current
Small 4-mm × 4-mm VQFN-24 Package (RGE)
Description
The TPS6513x is dual-output DC-DC converter generating a positive output voltage up to 15 V and a negative output voltage down to –15 V with output currents in a 200-mA range in typical applications, depending on input voltage to output voltage ratio. With a total efficiency up to 85%, the device is ideal for portable battery-powered equipment. The input voltage range of 2.7 V to 5.5 V allows the devices to be powered from batteries or from fixed 3.3-V or 5-V supplies. The TPS6513x comes in a small 4-mm × 4- mm VQFN-24 package. Together with a minimum switching frequency of 1.25 MHz, the device enables designing small power supply applications because it requires only a few small external components.
The converter operates with a fixed frequency PWM control topology and, if power-save mode is enabled, it uses a pulse-skipping mode at light-load currents. It operates with only 500-μA device quiescent current. Independent enable pins allow power-up and powerdown sequencing for both outputs. The device has an internal current limit overvoltage protection and a thermal shutdown for highest reliability under fault conditions.
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
