Dual Advanced high-performance bus (AHB) system
Advanced vectored interrupt controller (VIC)
General purpose DMA controller (GPDMA)
Ethernet MAC with associated DMA controller
USB 2.0 full-speed device with on-chip PHY and associated DMA controller
CAN controller with two channels
SD/MMC memory card interface
70 General purpose I/O pins with configurable pull-up/down resistors
PWM/timer block with support for three-phase motor control
Real-time clock (RTC) with separate power pin
2KB SRAM powered from the RTC power pin
Watchdog timer (WDT)
Standard ARM test/debug interface for compatibility with existing tools
Emulation trace module supports real-time trace
Four reduced power modes - Idle, sleep, power-down and deep power-down
Processor wake-up from power-down mode via any interrupt able to operate during power-down mode
Two independent power domains allow fine tuning of power consumption based on needed features
Each peripheral has its own clock divider for further power saving
Brownout detect with separate thresholds for interrupt and forced reset
On-chip power-on reset
(Picture: Diagram)
Core
ARM7TDMI-S
Data Bus Width
16 bit/32 bit
Maximum Clock Frequency
72 MHz
Program Memory Size
128 KB
Data RAM Size
34 KB
On Chip ADC
Yes
Operating Supply Voltage
3 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Package / Case
SOT-407-1
Mounting Style
SMD/SMT
A/D Bit Size
10 bit
A/D Channels Available
6
Interface Type
CAN, I2C, I2S, SPI, SSP, UART, USB
Length
14 mm
Minimum Operating Temperature
- 40 C
Number of Programmable I/Os
70
Number of Timers
4
On Chip DAC
Yes
Packaging
Tray
Processor Series
LPC23
Program Memory Type
Flash
Series
LPC2000
Factory Pack Quantity
90
Part # Aliases
LPC2364FBD100-S
ModelsDescriptionOperation
LPC2214FBD144High-frequency devices MIC, PHILIS, LQFP-144Compare
LPC2292FBD144power semiconductor devices MIC, PHILIPS, LQFP-144Compare
LPC2294HBD144/01MCU, NXP, LQFP144Compare
LPC2361FBD100NXP, LQFP100Compare
LPC2364FBD100Capacitor Arrays, NXP, LQFP-100Compare
LPC2294FBD144MIC, NXP, TQFP144Compare