Dual Advanced high-performance bus (AHB) system
EMC provides support for static devices
Advanced vectored interrupt controller (VIC) supporting up to 32 vectored interrupts
General purpose DMA controller (GPDMA)
Ethernet MAC with associated DMA controller
USB 2.0 device/host/OTG with on-chip PHY and associated DMA controller
CAN controller with two channels
Two SSP controllers, with FIFO and multi-protocol capabilities
SD/MMC memory card interface
104 General purpose I/O pins with configurable pull-up/down resistors
PWM/timer block with support for three-phase motor control
Real-time clock (RTC) with separate power pin
2KB SRAM powered from the RTC power pin
Watchdog timer (WDT)
Standard ARM test/debug interface for compatibility with existing tools
Emulation trace module supports real-time trace
Four reduced power modes - Idle, sleep, power-down and deep power-down
Processor wake-up from power-down mode via any interrupt able to operate during power-down mode
Two independent power domains allow fine tuning of power consumption based on needed features
Each peripheral has its own clock divider for further power saving
(Picture: Diagram)
Core
ARM7TDMI-S
Data Bus Width
16 bit/32 bit
Maximum Clock Frequency
72 MHz
Program Memory Size
512 KB
Data RAM Size
98 KB
On Chip ADC
Yes
Operating Supply Voltage
3 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Package / Case
SOT-486
Mounting Style
SMD/SMT
Interface Type
CAN, I2C, I2S, SPI, SSP, UART, USB
Length
20 mm
Minimum Operating Temperature
- 40 C
Number of Programmable I/Os
104
Number of Timers
4
On Chip DAC
Yes
Packaging
Tray
Processor Series
LPC23
Program Memory Type
Flash
Series
LPC2000
Factory Pack Quantity
60
Part # Aliases
LPC2388FBD144-S
ModelsDescriptionOperation
LPC2387FBD100Logic ICs, NXP, LQFP-100Compare
LPC2388FBD144Circuit Breakers, NXP, LQFP144Compare
LPC2364FBD100Capacitor Arrays, NXP, LQFP-100Compare
LPC2378FBD144More ICs, NXP, LQFP-144Compare
LPC2368FBD100More ICs, NXP, LQFP-100Compare
LPC2368FBD100-SNXP, LQFP100Compare