252 MHz/415 DMIPS, MIPS Warrior M-class core

DSP-enhanced core:

Dual Panel Flash for live update support

FPU for fast single- and double-precision math

12-bit, 18 MSPS, 40-channel ADC module

Memory Management Unit for optimum embedded OS execution

microMIPS mode for up to 35% code compression

CAN, UART, I2C, PMP, EBI, SQI & Analog Comparators

SPI/I2S interfaces for audio processing and playback

Hi-Speed USB 2.0 Device/Host/OTG

10/100 Mbps Ethernet MAC with MII and RMII interface

Temperature Range: - 40°C to 85°C; - 40°C to 125°C 

AEC-Q100 Qualified

Operating voltage range of 2.2V to 3.6V

2MB Flash memory (plus an additional 160 KB of Boot Flash)

512KB SRAM memory

microMIPS mode for up to 35% smaller code size

DSP-enhanced core:

FPU for fast single- and double-precision math

Code-efficient (C and Assembly) architecture

Low-power management modes (Idle and Sleep)

50 MHz External Bus Interface (EBI)

50 MHz Serial Quad Interface (SQI)

Peripheral Pin Select (PPS) functionality to enable function remap

8 channels of hardware programmable DMA and 18 channels of dedicated DMA with automatic data size detection

Six UART modules (25 Mbps): Supports LIN 1.2 and IrDA protocols

Two CAN modules 2.0B Active with DeviceNet addressing support

Six 4-wire SPI modules (50 Mbps)

SQI configurable as an additional SPI module (50 MHz)

Five I2C modules (up to 1 Mbaud) with SMBus support

Parallel Master Port (PMP)

Hardware Real-Time Clock and Calendar (RTCC)

Nine 16-bit Timers/Counters (four 16-bit pairs combine to create four 32-bit timers)

Nine Capture inputs and Nine Compare/PWM outputs

Graphics interface: EBI or PMP

Audio data communication: I2S, LJ, RJ, USB

Audio data control interface: SPI and I2C™

Audio data master clock: Fractional clock frequencies with USB synchronization

12-bit ADC Module:

Two analog comparators with 32 programmable voltage references

Temperature sensor with ±2°C accuracy

In-circuit and in-application programming

4-wire MIPS® Enhanced JTAG interface

Unlimited program and 12 complex data breakpoints

IEEE 1149.2-compatible (JTAG) boundary scan

Non-intrusive hardware-based instruction trace

MPLAB Harmony - PIC32 software development framework

C/C++ compiler with native DSP/fractional and FPU support

TCP/IP, USB, Graphics and mTouch middleware

MFi, Android and Bluetooth audio frameworks

RTOS Kernels, Express Logic ThreadX, FreeRTOS, OPENRTOS, Micriµm, µC/OS and SEGGER embOS