All trademarks are the property of their respective owners.
DescriptionThe BQ2461x is a highly integrated Li-ion, Li-polymer or Lead-acid switched-mode batterycharge controller. The device offers a constant-frequency synchronous switching PWM controller withhigh-accuracy charge current and voltage regulation, charge preconditioning, termination, adaptercurrent regulation, and charge status monitoring.
The BQ2461x charges the battery in three phases: preconditioning, constant current, andconstant voltage.
Charge is terminated when the current reaches a minimum user-selectable level. Aprogrammable charge timer provides a safety backup. The BQ2461x automatically restarts the chargecycle if the battery voltage falls below an internal threshold, and enters a low quiescent currentsleep mode when the input voltage falls below the battery voltage.
600-kHz NMOS-NMOS Synchronous buck converter
Stand-alone charger support for li-ion or li-polymer
5-V to 28-V VCC Input operating range and supports 1- to 6-battery cells(BQ24610)
5-V to 24-V VCC Input operating range and supports 1- to 5-battery cells(BQ24617)
Up to 10-A charge current and adapter current
High-accuracy voltage and current regulation
±0.5% Charge voltage accuracy
±3% Charge current accuracy
±3% Adapter current accuracy
Integration
Automatic system power selection from adapter orbattery
Non Power Path option for low total BOM cost
Internal loop compensation and soft start
Dynamic power management
Safety protection
Input overvoltage protection
Battery thermistor sense hot and cold charge suspend
Battery detection
Reverse protection input FET
Programmable safety timer
Charge overcurrent protection
Battery short protection
Battery overvoltage protection
Thermal shutdown
Status Outputs
Adapter present
Charger operation status
Charge enable pin
6-V Gate drive for synchronous buck converter
Energy star low quiescent current Iq
< 15-μA Off-state battery discharge current
< 1.5-mA Off-state input quiescent current
All trademarks are the property of their respective owners.
DescriptionThe BQ2461x is a highly integrated Li-ion, Li-polymer or Lead-acid switched-mode batterycharge controller. The device offers a constant-frequency synchronous switching PWM controller withhigh-accuracy charge current and voltage regulation, charge preconditioning, termination, adaptercurrent regulation, and charge status monitoring.
The BQ2461x charges the battery in three phases: preconditioning, constant current, andconstant voltage.
Charge is terminated when the current reaches a minimum user-selectable level. Aprogrammable charge timer provides a safety backup. The BQ2461x automatically restarts the chargecycle if the battery voltage falls below an internal threshold, and enters a low quiescent currentsleep mode when the input voltage falls below the battery voltage.
(Picture: Diagram)
Packaging | Reel | Factory Pack Quantity | 3000 |
---|---|---|---|
Series | BQ24617 |
ModelsDescriptionOperation
BQ24616RGETBattery Management, TI, VQFN-24Compare
BQ24600RVARBattery Management, TI, QFN-16Compare
BQ24616RGERBattery Management, TI, VQFN-24Compare
BQ24400DBattery Management, TI, SOIC-8Compare
BQ24450DWTRBattery Management, TI, SOIC-16Compare
BQ24392RSERUSB Interface IC, TI, UQFN-10Compare