All trademarks are the property of their respective owners.
DescriptionThe TLV62085RLTR device is a high-frequency synchronous step-down converter optimized forsmall solution size and high efficiency. With an input voltage range of 2.5 V to 6.0 V, commonbattery technologies are supported. The devices focus on high-efficiency step-down conversion overa wide output current range. At medium to heavy loads, the converter operates in PWM mode andautomatically enters Power Save Mode operation at light load to maintain high efficiency over theentire load current range.
To address the requirements of system power rails, the internal compensation circuitallows a large selection of external output capacitor values ranging from 10 μF to 150 μF andabove. Together with its DCS-Control? architecture, excellent loadtransient performance and output voltage regulation accuracy are achieved. The device is availablein a 2-mm × 2-mm VSON package.
DCS-Control? Topology
Up to 95% Efficiency
17-μA Operating QuiescentCurrent
31mΩ and 23mΩ Power MOSFET Switch
2.5-V to 6.0-VInput Voltage Range
0.8-V to VIN Adjustable OutputVoltage
Power Save Mode for Light Load Efficiency
100% Duty Cycle for Lowest Dropout
Hiccup Short-Circuit Protection
Output Discharge
Power Good Output
Thermal Shutdown Protection
Available in 2-mm × 2-mm VSON Package
For Improved Feature Set,See TPS62085
Create a Custom Design using the TLV62085 with theWEBENCH?Power Designer
All trademarks are the property of their respective owners.
DescriptionThe TLV62085 device is a high-frequency synchronous step-down converter optimized forsmall solution size and high efficiency. With an input voltage range of 2.5 V to 6.0 V, commonbattery technologies are supported. The devices focus on high-efficiency step-down conversion overa wide output current range. At medium to heavy loads, the converter operates in PWM mode andautomatically enters Power Save Mode operation at light load to maintain high efficiency over theentire load current range.
To address the requirements of system power rails, the internal compensation circuitallows a large selection of external output capacitor values ranging from 10 μF to 150 μF andabove. Together with its DCS-Control? architecture, excellent loadtransient performance and output voltage regulation accuracy are achieved. The device is availablein a 2-mm × 2-mm VSON package.
(Picture: Diagram)
| Function | Step-Down | Voltage Output (Max) | 6V |
|---|---|---|---|
| Output Configuration | Positive | Current Output | 3A |
| Topology | Buck | Frequency Switching | 2.4MHz |
| Output Type | Adjustable | Synchronous Rectifier | Yes |
| Number of Outputs | 1 | Operating Temperature | -40??C ~ 125??C (TJ) |
| Voltage Input (Min) | 2.5V | Mounting Type | Surface Mount |
| Voltage Input (Max) | 6V | Package / Case | 7-VFDFN |
| Voltage Output (Min/Fixed) | 0.8V | Supplier Device Package | 7-VSON (2x2) |