The TPS62110QRSARQ1 is a low-noise synchronous step-down dc-dc converter that is ideally suited for systems powered from a 2-cell Li-ion battery or from a 12-V or 15-V rail.
The TPS62110QRSARQ1 is a synchronous PWM converter with integrated N-channel and P-channel power MOSFET switches. Synchronous rectification is used to increase efficiency and to reduce external component count. To achieve highest efficiency over a wide load current range, the converter enters a power-saving, pulse-frequency modulation (PFM) mode at light load currents. Operating frequency is typically 1 MHz, allowing the use of small inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 0.8 MHz to 1.4 MHz. For low noise operation, the converter can be operated in PWM-only mode. In the shutdown mode, the current consumption is reduced to less than 2 μA. The TPS62110QRSARQ1 is available in the 16-pin (RSA) QFN package and operates over a free-air temperature range of –40°C to 125°C.
Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
Device HBM ESD Classification Level H2
Device CDM ESD Classification Level C3B
High-Efficiency Synchronous Step-Down Converter With up to 95% Efficiency
3.1-V to 17-V Operating Input Voltage Range
Adjustable Output Voltage Range From 1.2V to 16V
Synchronizable to External Clock Signal up to 1.4 MHz
Up to 1.5-A Output Current
High Efficiency Over a Wide Load Current Range Due to PFM/PWM Operation Mode
100% Maximum Duty Cycle for Lowest Dropout
20-μA Quiescent Current (Typical)
Overtemperature and Overcurrent Protected
Available in 16 Pin QFN Package
The TPS62110 is a low-noise synchronous step-down dc-dc converter that is ideally suited for systems powered from a 2-cell Li-ion battery or from a 12-V or 15-V rail.
The TPS62110 is a synchronous PWM converter with integrated N-channel and P-channel power MOSFET switches. Synchronous rectification is used to increase efficiency and to reduce external component count. To achieve highest efficiency over a wide load current range, the converter enters a power-saving, pulse-frequency modulation (PFM) mode at light load currents. Operating frequency is typically 1 MHz, allowing the use of small inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 0.8 MHz to 1.4 MHz. For low noise operation, the converter can be operated in PWM-only mode. In the shutdown mode, the current consumption is reduced to less than 2 μA. The TPS62110 is available in the 16-pin (RSA) QFN package and operates over a free-air temperature range of –40°C to 125°C.
Packaging | Reel | Factory Pack Quantity | 3000 |
---|---|---|---|
Series | TPS62110-Q1 |
ModelsDescriptionOperation
TPS62050DGSPower Management ICs, TI, MSOP-10Compare
TPS62080DSGRPower Management ICs, TI, WSON-8Compare
TPS62067DSGTPower Management ICs, TI, WSON-8Compare
TPS62056DGSSwitching Converters, Regulators & Controllers, TI, MSOP-10Compare
TPS62082DSGRPower Management ICs, TI, WSON-8Compare
TPS62054DGSGTI, MSOP10Compare