LM2576T-5.0/NOPB

Manufacturers：TI
QTy：71800
Partno：NEW
Packing：TO220
Content：In stock

LM2576T-5.0/NOPB

ACTIVE

SIMPLE SWITCHER® 40V, 3A Low Component Count Step-Down Regulator

Quality information

More LM2576 information

• Parametrics

• Technical documentation

• Design & development

• Support & training

Packaging information

 View TI packaging information

Features for the LM2576

• New product available: LMR33630 36-V, 3-A, 400-kHz synchronous converter

• 3.3-V, 5-V, 12-V, 15-V, and adjustable output versions

• Adjustable version output voltage range: 1.23 V to 37 V (57 V for HV version) ±4% maximum over line and load conditions

• Specified 3-A output current

• Wide input voltage range: 40 V Up to 60 V for HV version

• Requires only four external components

• 52-kHz Fixed-frequency internal oscillator

• TTL-shutdown capability, low-power standby mode

• High efficiency

• Uses readily available standard inductors

• Thermal shutdown and current limit protection

• Create a Custom Design with WEBENCH Tools

All trademarks are the property of their respective owners.

Description for the LM2576

The LM2576 series of regulators are monolithic integrated circuits that provide all theactive functions for a step-down (buck) switching regulator, capable of driving 3-A load withexcellent line and load regulation. These devices are available in fixed output voltages of 3.3 V,5 V, 12 V, 15 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use andinclude fault protection and a fixed-frequency oscillator.

The LM2576 series offers a high-efficiency replacement for popular three-terminal linearregulators. It substantially reduces the size of the heat sink, and in some cases no heat sink isrequired.

A standard series of inductors optimized for use with the LM2576 are available fromseveral different manufacturers. This feature greatly simplifies the design of switch-mode powersupplies.

Other features include a ±4% tolerance on output voltage within specified input voltagesand output load conditions, and ±10% on the oscillator frequency. External shutdown is included,featuring 50-µA (typical) standby current. The output switch includes cycle-by-cycle currentlimiting, as well as thermal shutdown for full protection under fault conditions.

The new product,LMR33630,offers reduced BOM cost, higher efficiency, and an 85% reduction in solution size among many otherfeatures. See theDeviceComparison Tableto compare specs. Start aWEBENCHDesign with LMR33630.