The MAX4906FELB+T is a high /full speed USB 2.0 switch in 10 pin µDFN package. This analogue switch combines the low on capacitance (CON) and low on-resistance (RON) necessary for high performance switching applications. Device is designed for USB 2.0 high speed applications at 480Mbps. This switch will also handle all requirements for USB low and full speed signalling. It features two single-pole/double-throw (SPDT) switch and has a low 7ohm (max), on-resistance and 7pF (max) on-capacitance. Device is fully specified to operate from a single +3V to +3.6V power supply and is protected against a +5.5V short to COM1 and COM2. This feature makes it fully compliant with USB 2.0 specification of +5.5V fault protection. It features a low threshold voltage and a +1.4V VIH, permitting it to be used with low voltage logic. It is used in GPS, notebook computers, relay replacements, USB switching, Ethernet switching, video switching, Bus switches and T3/E3 switches for redundancy protection.
Feature
Quiescent supply current is 300µA (max) at V+ = 3.6V, VIN = 0
Operating temperature range from -40°C to 85°C
1GHz (typ) -3dB bandwidth
Low bit to bit skew <= 100ps
Shutdown input reduces power consumption to 2µA (max)
3.3V, 1.8V and 1.4V logic compatible
Total harmonic distortion plus noise is 0.03% at VCOM_ = 2VP-P, RL = 600 ohm, f = 20Hz to 20KHz
Charge injection is 5pC at VGEN = 1.5V, RGEN = 0ohm, CL = 100pF
Applications
Industrial-Control Local Area Networks
Level Translators
Low-Power RS-422 Transceivers
Low-Power RS-485 Transceivers
Transceivers for EMI-Sensitive Applications
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
