The LTM8053EY#PBF is a 40VIN, 3.5A continuous, 6A peak stepdown µModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8053EY#PBF supports an output voltage range of 0.97V to 15V and a switching frequency range of 200kHz to 3MHz, each set by a single resistor. Only the input and output filter capacitors are needed to finish the design. The LTM8053-1 can operate in forced continuous mode.
The low profile package enables utilization of unused space on the bottom of PC boards for high density point of load regulation. The LTM8053EY#PBF is packaged in a thermally enhanced, compact over-molded ball grid array (BGA) package suitable for automated assembly by standard surface mount equipment. The LTM8053EY#PBF is RoHS compliant.
Feature
Complete Step-Down Switch Mode Power Supply
Low Noise Silent Switcher® Architecture
Wide Input Voltage Range: 3.4V to 40V
Wide Output Voltage Range: 0.97V to 15V
3.5A Continuous Output Current at 12VIN, 5VOUT, TA = 85°C
6A Peak Output Current
Parallelable for Increased Output Current
Selectable Switching Frequency: 200kHz to 3MHz
Tiny, Low Profile 6.25mm × 9mm × 3.32mm RoHS Compliant BGA Package
Applications
Automotive Battery Regulation
Power for Portable Products
Distributed Supply Regulation
Industrial Supplies
Wall Transformer Regulation
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
