The LM2575HVS-12 device greatly simplifies the design of switching power supplies by conveniently providing all the active functions needed for a step-down (buck) switching regulator in an integrated circuit. Accepting a wide input voltage range and available in an adjustable output version, the LM2575HVS-12 has an integrated switch capable of delivering 1 A of load current, with excellent line and load regulation. The device also offers internal frequency compensation, a fixed-frequency oscillator, cycle-by-cycle current limiting, and thermal shutdown. In addition, a manual shutdown is available through an external ON/OFF pin.
The LM2575HVS-12 represents a superior alternative to popular three-terminal linear regulators. Due to its high efficiency, it significantly reduces the size of the heat sink and, in many cases, no heat sink is required. Optimized for use with standard series of inductors available from several different manufacturers, the LM2575HVS-12 greatly simplifies the design of switch-mode power supplies by requiring a minimal addition of only four to six external components for operation.
The LM2575HVS-12 is characterized for operation over the virtual junction temperature range of –40°C to 125°C.
Feature
Adjustable With a Range of 1.23 V to 37 V and
±4% Regulation (Max) Over Line, Load, and
Temperature Conditions
Specified 1-A Output Current
Wide Input Voltage Range 4.75 V to 40 V
Uses Readily Available Standard Inductors
52-kHz (Typical) Fixed-Frequency Internal
Oscillator
TTL Shutdown Capability With 50-μA (Typical)
Standby Current
High Efficiency…as High as 88% (Typical)
Thermal Shutdown and Current-Limit Protection
With Cycle-by-Cycle Current Limiting
For the Full Offering of Voltages (Including Fixed-
Output Options) and Packages (Including TO-
263), See TL2575 Data Sheet, SLVS638
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
