Plastic packaged low noise active mixer. It is usedfor down frequency conversion and has an ultrawideband IF of over 6 GHz. The mixer integratesan FET gain element with LO and RF driving thesame pin. The transconductance mixing allowsvery low noise figure for an active mixer.This mixer can be used for either lower sideband(LSB) or upper sideband (USB) mixing.This mixer allows very low LO drive (< 0 dBm)and low DC bias. Typically the IF pin is 3v at 15mA typical and the VG pin is 0.9v.Mixer is housed in a lead-free ultra small 1.5 x 1.2mm TDFN surface mount plastic package.The Mixer is fabricated using a GaAs processwhich features full passivation for increasedperformance and reliability.
Feature
Down Frequency Mixer
LO Frequency: 4 – 23 GHz
RF Frequency: 4 – 23 GHz
Low Power Consumption: 3v/15mA
Low Noise: 7 dB Typical
Conversion Gain: 7 dB Typical
Halogen-Free “Green” Mold Compound
Lead-Free 1.5x1.2mm 6 lead TDFN Pkg
IF Frequency: DC – 8 GHz
RoHS Complaint and 260oC Reflow
Applications
Applications
Min Frequency, RF/LO: 4,000 MHz
Max Frequency, RF/LO: 23,000 MHz
Min Frequency, IF: 0 MHz
Max Frequency, IF: 8,000 MHz
Conversion Loss: 7 dB
IIP3 : 7 dBm
LO Drive: -2 dBm
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
