The LT6233/LT6234/LT6235 are single/dual/quad low noise, rail-to-rail output unity-gain stable op amps that feature 1.9nV/√Hz noise voltage and draw only 1.2mA of supply current per amplifier. These amplifiers combine very low noise and supply current with a 60MHz gain bandwidth product, a 17V/μs slew rate and are optimized for low supply voltage signal conditioning systems. The LT6233-10 is a single amplifier optimized for higher gain applications resulting in higher gain bandwidth and slew rate. The LT6233 and LT6233-10 include an enable pin that can be used to reduce the supply current to less than 10μA.
The amplifier family has an output that swings within 50mV of either supply rail to maximize the signal dynamic range in low supply applications and is specified on 3.3V, 5V and ±5V supplies. The en • √ISUPPLY product of 2.1 per amplifier is among the most noise efficient of any op amp.
The LT6233/LT6233-10 are available in the 6-lead SOT-23 package and the LT6234IS8 dual is available in the 8-pin SO package with standard pinouts. For compact layouts, the dual is also available in a tiny dual fine pitch leadless package (DFN). The LT6235 is available in the 16-pin SSOP package.
Feature
Low Noise Voltage: 1.9nV/√Hz
Low Supply Current: 1.2mA/Amp Max
Low Offset Voltage: 350μV Max
Gain-Bandwidth Product:
Wide Supply Range: 3V to 12.6V
Output Swings Rail-to-Rail
Common Mode Rejection Ratio: 115dB Typ
Output Current: 30mA
Operating Temperature Range: –40°C to 85°C
LT6233 Shutdown to 10μA Maximum
LT6233/LT6233-10 in a Low Profile (1mm) ThinSOT™ Package
Dual LT6234 in 8-Pin SO and Tiny DFN Packages
LT6235 in a 16-Pin SSOP Package
Applications
Catalogue
FPGA / CPLD
Memory
MOS 
MCU 
DSP
OCEP
Secondary 
Other 
