• Dual input/output reclocker with 2:1 input selector and on-chip termination

• SMPTE ST 2082-1, ST 2081-1, ST 424, ST 292-1 and ST 259 compliant input/output

• Multi-standard operation from 1Mb/s to 11.88Gb/s

• In addition to standard SMPTE rates, the device also supports re-timing of DVB-ASI at 270Mb/s, and MADI at 125Mb/s and 10GbE

• 3D Input Signal Eye Monitor

• PRBS generator and checker

• Trace driver features

• Integrated 100Ω, differential output termination

• Extends output DC-coupling support with 1.2V to 2.5V output supply range

• Trace driver data output pre-emphasis to compensate for up to 20” FR4 at 11.88Gb/s

• Manual or automatic re-timer bypass

• Manual or automatic mute or disable on LOS

• Trace equalizer features
  

• Integrated 100Ω, differential input termination

• Automatic power down on loss of signal

• Trace equalization to compensate for up to 20” FR4 at 11.88Gb/s

• Automatic input offset compensation

• CDR features
  

• Manual or automatic rate modes

• Wide Loop bandwidth control

• Re-timing at the following data rates: 125Mb/s, 270Mb/s, 1.485Gb/s, 2.97Gb/s, 5.94Gb/s, 11.88Gb/s, and 10.3125 Gb/s. This includes the f/1.001 rates.

Additional Features

• Single 1.8V power supply for analog and digital core

• 1.2V, 1.8V or 2.5V for trace driver output supply

• GSPI serial control and monitoring interface

• Four configurable GPIO pins for control or status monitoring

• Wide operating temperature range: -40ºC to +85ºC

• Small 6mm x 4mm 40-pin QFN

• Pb-free/Halogen-free/RoHS and WEEE compliant package
   

Next Generation 12G UHD-SDI infrastructures designed to support UHDTV1, UHDTV2, 4K D-Cinema and 3D HFR and HDR production image formats.

Typical applications: Cameras, Switchers, Distribution Amplifiers and Routers.

Order Codes

• GS12150-INE3: Lead-Free, RoHS Compliant, Tray-490 Pieces

• GS12150-INTE3: Lead-Free, RoHS Compliant, Tape and Reel-250 Pieces

• GS12150-INTE3Z: Lead-Free, RoHS Compliant, Tape and Reel-2500 Pieces